STIRRING HOT PLATE, CERAMIC PLATED

STIRRING HOT PLATE , CERAMIC PLATED MODEL HS 10-2 TORREY PINES SCIENTIFIC - USA Heat, stir, or heat and stir on a rugged, quick heating, flat, white, solid ceramic heater surface. Heat to 450°C on plate surface in minutes Stir from 100 to 1500 rpm Plate size on the HS10, HP10 and ST10 is: 8" (20.32cm) x 8" (20.32cm) Plate size on the HS1, HP1 and ST1 is 6"(15.24cm) x 6" (15.24cm) Plate size on HS11, HP11 and ST11 is 12"(30.48cm) x 12"(30.48cm) Solid ceramic heater surface for excellent chemical resistance Milled-flat cast aluminum tops for even heating in 6" x 6" and 12" x 12" models Heater plate mounted in cast aluminum frame that remains cool for safety Efficient 600-watt heaters on the HS10 and HP10 Efficient 400-watt heaters on the HS1 and HP1 Powerful 1400 watt heaters on ceramic-topped HS11 and HP11 and 1200 watt heaters on HS11A and HP11A Fused for safety Rugged cast aluminum chassis 12-month warranty UL, CSA, and CE certified Each Torrey Pines Scientific hot plate is made with a cast aluminim chassis that is painted with chemically resistant epoxy paint. The chassis is designed to keep spills out of the case. Heating and stirring controls are solid state with individual indicator lights which illuminate when either is activated. The controls are well forward of the heater surface to prevent accidental burns. Additionally, the solid ceramic heater plate is framed in cast aluminum and is designed to keep heat from the edge of the heater plate. . The stirrer features a solid state control capable of stirring an aqueous solution from 100 to 1500 rpm. The control has an OFF position fully counter-clockwise, and is continuous over 270 degrees of rotation from minimum to maximum speed when turned on. The magnet is a circular disc with twenty pound pull strength and is capable of stirring more than two liters of aqueous solution. The heater control has OFF, LO, and HIGH positions for quick setting, and a smooth infinite control of about 270 degrees between LO and HIGH settings. The control will regulate a set point to ±2.5°C. Control knobs are specially selected to provide easy use and positive, tactile feel. All units are fused, and have a 3-foot long detachable AC line cord with a male plug that matches the local standard. The warranty is 12 months. . Product Specification: Hot Plate: Solid ceramic Maximum temperature of the plate surface Aluminum: 400°C Ceramic: 450°C Time to maximum temperature, unloaded Aluminum: 10 minutes Ceramic: 3 minutes Temperature control Aluminum: +/-2.5°C Ceramic: =/-2.5°C Heater power, watts HS1 & HP1: 400 watts HS10 & HP10: 600 watts HS11 & HP11, Aluminum: 1200 watts HS11 & HP11, Ceramic: 1400 watts Stirrer: Speed range unloaded 100 to 1500 rpm Maximum load, aqueous HS1, ST1, HS10, ST10: over 2 liters HS11 and ST11: over 10 liters Magnet strength 20 pounds Weight capacity on heater surface Over 50 pounds (22.5 kilos) Electrical: Operating voltages available 100VAC/50Hz, 115VAC/60HZ, 220VAC/60HZ, and 230VAC/50Hz Power consumption HS10 and HP10: 650 watts HS1 and HP1: 450 watts ST10 and ST1: 100 watts HS11 & HP11: 1450 watts HS11A & HP11A: 1250 watts ST11: 100 watts Current Draw 100/115VAC Models: HP1 & HS1: 3.75 amps HP10 & HS10: 6.5 amps HP11 & HS11: 12.0 amps HP11A & HS11A: 10.4 amps 220/230VAC Models: HP1 & HS1: 1.9 amps HP10 & HS10: 3.25 amps HP11 & HS11: 6.0 amps HP11A & HS11A: 5.2 amps Additional Information: Unit size HS10, HP10 and ST10: 12"(33cm) deep by 9"(22.9cm) wide by 3.5"(8.9cm) tall HS1, HP1 and ST1: 10"(25.4cm) deep by 7"(17.78cm) wide by 4.5"(11.43cm) tall HS11, HP11 and ST11: 17" x 12.5" x 5.5" Unit Weight, unpacked HS10 and ST10, 10 pounds(4.5kg). HP10, 8 pounds(3.6kg) HS1 and ST1, 7 pounds(3.17kg). HP1, 5 pounds(2.26kg) HS11: 20 lbs HS11A: 22 lbs HP11: 16 lbs HP11A: 18 lbs ST11: 13 lbs